Performance
| Model Tube | Feed Rate | Max Speed | Max Pressure | Max Temperature | ||
| GPH | LPH | mL/Min | RPM | PSI(bar) | °F(°C) | |
| 1 | 0.0001 – 1.09 | 0.0004 – 4.13 | .0069 – 69 | 65 | 65 (4.50) | 130 (54) |
| 3 | 0.0005 – 5.60 | 0.0021 – 21.2 | .0353 – 353 | 65 | 50 (3.45) | 130 (54) |
| 4 | 0.0001 – 0.44 | 0.0002 – 1.68 | .0028 – 28 | 65 | 100 (6.89) | 130 (54) |
| 6 | 0.0001 – 1.35 | 0.0005 – 5.14 | .0085 – 85 | 65 | 100 (6.89) | 185 (85) |
| 7 | 0.0004 – 4.17 | 0.0015 – 15.8 | .0263 – 263 | 65 | 50 (3.45) | 185 (85) |
| 8 | 0.0003 – 3.09 | 0.0011 – 11.7 | .0195 – 195 | 65 | 50 (3.45) | 130 (54) |
Maximum Fluid Temperature: 185 °F (85 °C)
Maximum Viscosity: 5,000 Centipoise
Maximum Suction Lift: 30 ft at sea level (14.7 atm psi)
Electrical and Controls
Electrical Power Requirement: 100 to 240VAC, 50/60Hz
Motor: Brushless DC, 50W, 10,000:1 Turndown, Continuous Duty
Power cord options available (6 feet in length):
- 115VAC 50/60HZ, NEMA 5/15 plug (U.S.) – (choose when specifying pump model)
- 220VAC 50/60HZ , CEE 7/V11 plug (EU) – (choose when specifying pump model)
- 230VAC 50/60HZ, NEMA 6/15 (U.S.) – (ordered separately)
- 240VAC 50/60HZ, AS 3112 plug (Australia / New Zealand) (ordered separately)
- 230VAC 50/60HZ, BS 1363/A plug (UK) (ordered separately)
Signal Connectors: M12 – 5 pin (IP67 rated connectors)
Inputs:
- 4-20 mA – fully configurable
- Stop/Start Dry Contact Closure (Configurable for N.O. or N.C.)
- FVS (Flow Verification System) (Flow sensor provided by others)
Outputs:
- 4-20 mA output – non-scalable
- Alarm Output – TFD+ (leak detection) and FVS (flow verification – flow sensor ordered separately)
- Motor On Status – open collector output
Materials of Construction
Pump Head: Valox® (PBT)
Pump Head Cover: Acrylic, with permanently sealed motor shaft support bronze sleeve bearing.
Cover Screws: Stainless steel, polypropylene cap.
Roller assembly: Rotor – Valox, Rollers – Nylon, Roller bearings – Bronze.
Motor Shaft: Chrome Plated Steel
TFD+ Sensor: Polysulfone (PES)
Power Cord: 3 Conductor, SJTW-A water-resistant
Mounting Brackets: GF Nylon bracket, 316 Stainless Steel
Enclosure: NEMA 4X (IP66) Valox
Tube Assembly Options
Flex-A-Prene® tubing: An excellent material for most water treatment applications. Chemically resistant to 25% Sodium Hypochlorite, 30% Sulfuric Acid, 30% Fluosilicic Acid, Ferric Chloride, Alum, and many others.
Flex-A-Chem® tubing: This material consists of an outer Norprene jacket with an inner liner that is virtually unaffected by acids, bases, salts, ketones, and alcohols.
Flex-A-Thane® tubing: This polyurethane material can be used with a variety of chemicals, including Oil and Water based Polymers, fuels and lubricants, and many others.
Dimensions and Weights
Maximum Overall Dimensions: 9.5” W x 9.5” H x 10.4” D (24.1 W x 24.1 H x 26.4 D cm)
Product Weight: 8.5 Lb. (3.8 Kg)
Approximate Shipping Dimensions: 10.5” W x 11.75” H x 13” D (26.7 W x 29.8 H x 33 D cm)
Approximate Shipping Weight: 15.5 lb. (7.0kg)
Agency Listings
NSF 61
CE
cETLus
RoHS Compliant
