Performance for C3
C3*2*1*** Pump with .060” (1.52mm) stroke with Large Diaphragm
Maximum Flow/Pressure:
- 22.4 gph at 150 PSI
- 23.9 gph at 90 PSI
- 25.1 gph at 40 PSI
- 26.2 gph at 0 PSI
C3*2*2*** Pump with .100” (2.54mm) stroke with Large Diaphragm
Maximum Flow/Pressure:
- 34 gph at 100 PSI
- 36 gph at 70 PSI
- 38 gph at 40 PSI
- 40.6 gph at 0 PSI
Connections
Fitting connections for C3 pump:
- “A” = 1/2” Hose Barb Inlet, 1/2” Male NPT Outlet, with1/2” Male NPT Injector
- “B” = 1/2” Hose Barb Inlet, ½” Female NPT Outlet, with 1/2” Male NPT Injector
- “C” = 1/2” Hose Barb Inlet and Outlet, with 1/2” Hose Barb Injector
- “E” = 1/2” Male NPT Inlet and Outlet, with 1/2” Male NPT Injector
- “F” = 1/2” Female NPT Inlet and Outlet, with 1/2” Male NPT Injector
- Maximum Viscosity: 1,000 Centipoise
- Maximum Suction Lift: 15 ft water at sea level (14.7 atm psi)
Electrical and Controls
Electrical Power Requirement: 100 to 240VAC, 50/60Hz
Motor: Brushed DC, 100:1 Turndown, Continuous Duty (100% motor speed = 130 rpm/spm)
Power cord options available (6 feet length):
- 115VAC 50/60HZ, NEMA 5/15 plug (U.S.)
- 220VAC 50/60HZ ,CEE 7/V11 plug (EU)
- 230VAC 50/60HZ, NEMA 6/15 (U.S.)
- 240VAC 50/60HZ, AS 3112 plug (Australia / New Zealand)
- 230VAC 50/60HZ, BS 1363/A plug (UK)
Inputs:
- 4-20 mA – fully configurable (V model)
- Frequency / Pulse input – fully configurable (V model)
- Stop/Start Dry Contact Closure (or Wet Contact) (Normally Open)
- FVS (Flow Verification System) (Flow sensor provided by others)
Outputs:
- Motor Active output (Open collector)
- Alarm Output – Triggers with DFD or FVS
Materials of Construction
Non-wetted Components:
- Enclosure: 413 Aluminum (Polyester powder coated) – NEMA 4X (IP 66)
- Cover Screws: 300 Series stainless steel
- Pump Head Cover: 316 Stainless Steel
- Motor Shaft: Chrome-plated steel
- DFD System Sensor pins: Hastelloy C-276
- Power Cord: 3 conductor, SJTW-A water-resistant
- Mounting Brackets and Hardware: 316 Stainless steel
Wetted Components:
- Pump Head: PVDF
- Adapter Connections: PVDF
- Valve Cartridges: PVDF
- Valve Balls: Ceramic
- Elastomers: TFE/P
- Static Seals: TFE/P (optional EP)
- Diaphragm: DiaFlex® (optional Flex-A-Prene)
Diaphragm Options
DiaFlex® Diaphragm – This material consists of a natural PVDF flexible single-layer design compatible with most acids and bases. DiaFlex® is not compatible with sodium hydroxide or ammonia.
Flex-A-Prene® Diaphragm – An excellent material for most water treatment applications. Chemically resistant to 50% sodium hydroxide and many others.
Dimensions and Weights
- Maximum Overall Dimensions: 13.1”W x 7.9”H x 11.5”D (33.2W x 20.1H x 29.2D cm)
- Product Weight: 29 lb (13.1 Kg)
- Product Shipping Weight: 35 Lb. (14 Kg) (approximate)
Agency Listings
- CE
- cETLus
- RoHS Compliant
- NEMA 4X
