MS6
SONIC-PRO® Chemical Feed Flow Meter
The MS6 accurately measures liquid chemical feed from ranges of 10 – 5,000 mL/min and 100 – 10,000 mL/min. This plug-and-play flow meter works right out of the box but is easily configurable via Blue-Central® desktop software.
Pre-calibrated chemicals include Water, Aqueous Ammonia 10%, Ammonium Hydroxide 30%, Ferric Chloride 40%, Sodium Hypochlorite 12.5%, Sodium Permanganate 40%, Hydrofluorosilicic Acid 25%, and Ammonium Sulfate 10%. Additional chemicals can be calibrated by performing a custom chemical calibration.
Technical Overview:
mL/min
10 - 10000
GPH
.158 - 158.5
PSI
200
Bar
13.78
Fahrenheit (°F)
104
Celsius (°C)
40
Body Material
PVDF, PEEK
Pipe Sizes
½” barb, ½” M/NPT, ½” PVC slip
Literature
MS6 Literature
Instruction Manuals
MS6 Instruction Manual – 80000-593Technical Data Sheets
MS6 Technical Data Sheet – 85000-135Quickstart Guides
MS6 Quickstart Guide – 80000-602Catalog
Municipal Catalog 2023Engineering Specifications
MS6 Engineering Specifications
3D Visualizer
Features
Benefits:
- Flow Range 1: 10 – 5,000 mL/min (0.158 – 79.2 GPH)
- Flow Range 2: 100 – 10,000 mL/min (1.58 – 158.5 GPH)
- Sensor is NSF 61 Listed
- Inline pipe fittings for easy installation
- Configurable via Blue-Central® desktop software
- Isolated 4-20 mA output – fully configurable
- 0-10000Hz Pulse output – fully configurable
- User configurable flow rate and total set-point triggers
- Flow-rate readings as low as 10 mL/min
- Included wetted end fittings allow for more than 14 inlet and outlet configurations
- True unions for ease of maintenance
- Wetted components constructed out of PVDF and PEEK
- Quick visual inspection with built in status LED light
- Process control via configurable solid state relay, which can be configured to close or open trigger at a flow-rate or to flow total for batching operation
Specifications
Electronics/Hardware
SPU (Signal Processing Unit):
Enclosure
- NEMA 4X (IP66) Polycarbonate, SS hardware.
- Dimensions: 10.02H x Ø3.79 inches (254.5H x Ø96.1 mm)
- Weight 1.5 lb. (.68 Kg.)
Power Requirements
- 5 VDC; 5 watts maximum
Environmental Conditions
- Operating temp: 14 F to 104 F (-10 C to 40 C)
- Storage: -40 F to 158 F (-40 C to 70 C)
- Relative humidity: 0% – 90%
Display
- Type: Liquid Crystal Display
- Backlight: White LED backlight
Software Language
- English
Volume Units
- Independently configurable Rate and Total units in: U.S. Gallons, Liters, or Milliliters.
Time Units
- Seconds, minutes, hours, days.
Flow Rate Averaging
- Selectable: 1, 4, 8, 16, and 32 seconds.
Data Outputs
- Isolated 4-20 mA output – fully configurable
- 0-10000 Hz Pulse output – fully configurable
Process Control
- One Solid State Relay
- Load capacity: 24VDC, 100mA max (ex. supplied)
- Configure to flow rate for high/low/range rate trigger. Programmable release values enable auto release or manual latching operation.
- Configure to flow total for automatically triggered, timed batch operations for proportional feed applications.
Power Supply (user configurable)
- Includes each of the following:
- U.S. Transformer, 115VAC 60HZ / 5VDC, NEMA 5/15 plug
- Europe Transformer, 230VAC 50HZ / 5VDC, CEE 7/V11 plug
- Australia / New Zealand Transformer, 240VAC 50HZ / 5VDC, AS 3112 plug
- U.K. Transformer, 230VAC 50Z / 5VDC, BS 1363/A plug
Blue-Central® Software
Software Features
- Configurable 4-20mA, Pulse Output, Frequency Output,
- Solid State Relay Set-Point
- Monitor flow rate in real time
- Monitor total volume in real time
- Monitor meter diagnostics
- Field Upgradable Firmware
- Factory Resettable
- TDS #85000-137 rev.17 20191203
Compatible Operating Systems
- Windows 7, 8, and 10
- Mac (OSX 10.11/10.12/10.13)
Computer Connector
- USB-C (USB-A to USB-C cable included)
Wetted Materials
Transducer
- PEEK
Body
- PVDF & PEEK
O-Rings
- TFE/P
- EP
Fittings (Included)
- PVDF 1/2” I.D. Barb
- PVDF 1/2” I.D. Barb Elbow
- PVDF 1/2” M/NPT
- PVDF 1/2” M/NPT Elbow
- PVC 1/2” Slip
General Operation
Pre-Calibrated Chemical Profiles
- Water
- Aqueous Ammonia
- Ammonium Hydroxide
- Ferric Chloride 40%
- Sodium Bisulfite 40%
- Sodium Hypochlorite 12.5%
- Sodium Permanganate
- Hydrofluorosilicic Acid 25%
- Ammonium Sulfate 10%
Compatible Fluid Types
- Acoustically conductive fluids
- Particulate and bubbles with 50,000 ppm or less
Meter Ranges
Nothing to display here
Accessories
Replacement Parts
| Image | Catalog Number | Description | Price | Buy |
|---|
Downloads
| Title | |||
|---|---|---|---|
|
Industrial Catalog 2024 – 80000-707 |
17.00 MB | May 6, 2024 | Download |
|
Industrial Products Brochure |
2.84 MB | February 20, 2024 | Download |
|
MS6 Engineering Specifications |
30.14 KB | February 16, 2022 | Download |
|
MS6 Instruction Manual – 80000-593 |
6.94 MB | April 15, 2024 | Download |
|
MS6 Meter Mount Display Quick Start Guide – 80000-603 |
991.65 KB | June 14, 2024 | Download |
|
MS6 Quick Start Guide – 80000-602 |
1,022.35 KB | June 14, 2024 | Download |
|
MS6 Replacement Parts List |
515.00 KB | February 10, 2022 | Download |
|
MS6 Technical Data Sheet – 85000-135 |
1.73 MB | February 9, 2022 | Download |
|
Municipal Catalog 2024 – 80000-708 |
13.09 MB | July 16, 2024 | Download |
|
Municipal Products Brochure |
2.98 MB | February 14, 2024 | Download |
