APFCL Water Analyzer Product Specifications
APFCL Water Analyzers are constructed with the best materials using a thorough quality process.
- FCL 700 Sensor Body Material: 304SS
- Chlorine Range: 0.00-5.00 ppm, 0.00-10.0 ppm (Free or Total)
- Precision: +/- 0.01mg/L or 1% of the value w/pH compensation to 9.0
- pH Range: 0-14
- pH Precision: +/- 0.01 pH
- Sample Operating Temperature: 40 – 104 °F (4 °C – 40 °C)
- Sample Inlet Pressure: 7.5 – 30 psi (0.05 – 0.2MPa) (or as needed to provide the required flow rate. It may be possible to maintain the required flow with pressures as low as 3 PSI or 10 static feet of head with ideal conditions.)
- Sensor Maximum Pressure: 100 psi (6.9 Bar)
- Sensor Response Time: T95≤60s – Free Chlorine / T95≤5s – pH
- Measurement Interval: Continuous
- Installation: Polyethylene panel with WR05 Self-Regulating Flow Reservoir w/Rotameter & Isolation Valve – Included
- WR05 Minimum Flow Rate: 3.1 g/h (200 mL/minute)
- WR05 Maximum Flow Rate: 6.2 g/h (400 mL/minute)
- WR05 Sample Inlet: 1/4 inch OD
- WR05 Sample Outlet: 3/4 inch ID – To Drain
- WR05 Sewage Overflow Outlet: 3/8 inch OD – To Drain
- WR05 Bottom Drain Valve – To fully drain and clean the chamber
- Panel Power Supply: 110/220VAC 50/60 Hz, 0.6A
- Panel Storage Temperature: -4 – 158°F (-20 – 70°C)
- Panel Operating Temperature: 32 – 122°F (-0 – 50°C)
- TS05 Display: 2.8” Color 320 x 240 Resolution
- Input: 2 x 4-20 mA (pH and Cl) / RS-485 Modbus-RTU (from sensor)
- Output: 3 x 4-20 mA (2 for passthrough Cl and pH (non-configurable), and 1 configurable for pH, Temp, or Cl)
- Output: RS-485 Modbus-RTU
- Output: 1 x Contact Relay
- Data Storage: 32 M Flash
- Data Download: USB 1 x USB host for data downloading
- Relative Humidity: 5% – 95% (No Condensation)
- Altitude: <6,561 feet (<2,000 Meter)
- Dimension (H x W x D): Panel 24.0” x 12.0” x 15.67” (610H x 305W x 398D mm)
- Approximate Weight: ~ 11 lbs (5 kg)
- Chamber Wet Material: UPVC / Polycarbonate
- Rating: IP-65 Panel-Display / IP-67 Sensors
- Compliance: EPA 334.0 / ISO 7393
- Regulation: CE Marked / RoHS
- Typical Electrode Service Life: 2 years
- Electrode Warranty: 6 Months
- Sensor Body Warranty: 13 Months
- Shipping Dimensions: 29” x 17” x 13” (737H x 432W x 330D mm)
Materials of Construction
- Panel: Marine grade polyethylene, HDPE
- Panel Hardware: 316SS
- Inlet Tubing: Polyethylene
- Outlet Tubing: PVC
- Isolation Valve: Polypropylene
- Adapters: Polypropylene
- Flow Meter: Polysulfone / PVC
- WR05 Chamber: UPVC / 316SS
- Sensor: 316SS
Dimensions and Weights
- Maximum Overall Dimensions: Panel 24.0” x 12.0” x 15.67” (610H x 305W x 398D mm)
- Product Weight: 12 Lb. (5 Kg)
- Approximate Shipping Dimensions: 29” x 17” x 13” (737H x 432W x 330D mm)
- Approximate Shipping Weight: 25 lbs (12 kg)
Agency Listings
- CE
- RoHS Compliant
FAQs
Frequently Asked Questions
APFCL Specifications
- What is power requirement?
Power Requirement 110/220VAC / 50-60 Hz, 0.6 A
Define US EPA 334.0?US EPA 334.0 is a quality control protocol for chlorine residual monitoring, published by EPA in 2009. Method 334.0 is intended for use by drinking water facilities for compliance with daily monitoring and analysis of residual chlorine (free or total) and serves as a quality control procedure used to ensure that results obtained for residual chlorine at drinking water systems are accurate and precise.
What is bare-gold electrode technology?Bare-Gold electrode technology utilizes a unique gold surface allowing measurement without membranes or electrode solution replacement. The sensor signal is proportional to the diffusion rates of hypochlorous acid and hypochlorite ions from the bulk water directly to the sensor electrode surface.
What is a flow reservoir?The flow reservoir for the APFCL is a chamber where the water flow accumulates and calms allowing dissipation of bubbles, settling of solids, foams, and other impurities. The unique reservoir design allows for better resolution, accuracy, buffering, and more time between sensor maintenance and cleanings.
