Product Specifications

Performance for C2 

C2*2*5*** Pump with .040” (1.02mm) stroke with Micro-Feed Diaphragm 

Maximum Flow/Pressure: 

• 0.23 gph at 150 PSI 
• 0.95 gph at 90 PSI 
• 1.4 gph at 40 PSI 
• 2.3 gph at 0 PSI 

C2*2*6*** Pump with .060” (1.52mm) stroke with Micro-Feed Diaphragm 

Maximum Flow/Pressure:

• 2.0 gph at 150 PSI 
• 2.7 gph at 90 PSI 
• 3.4 gph at 40 PSI 
• 4.0 gph at 0 PSI 

C2*2*3*** Pump with .040” (1.02mm) stroke with Small Diaphragm 

Maximum Flow/Pressure: 

• 5.0 gph at 175 PSI 
• 5.5 gph at 120 PSI 
• 6.1 gph at 60 PSI 
• 6.7 gph at 0 PSI 

C2*2*1*** Pump with .060” (1.52mm) stroke with Small Diaphragm 

Maximum Flow/Pressure: 

• 7.5 gph at 175 PSI 
• 8.3 gph at 120 PSI 
• 9.25 gph at 60 PSI 
• 10.0 gph at 0 PSI 

C2*2*2*** Pump with .060” (1.52mm) stroke with Large Diaphragm 

Maximum Flow/Pressure: 

• 12.5 gph at 175 PSI 
• 13.75 gph at 120 PSI 
• 15.1 gph at 60 PSI 
• 16.5 gph at 0 PSI 

Connections

Fitting connections for C2 pump:

• “A” = 1/2” Hose Barb Inlet, 1/2” Male NPT Outlet, with1/2” Male NPT Injector 
• “B” = 1/2” Hose Barb Inlet, ½” Female NPT Outlet, with 1/2” Male NPT Injector 
• “C” = 1/2” Hose Barb Inlet and Outlet, with 1/2” Hose Barb Injector 
• “D” = 3/8” OD Tube Compression Inlet, Outlet, and Injector 
• “E” = 1/2” Male NPT Inlet and Outlet, with 1/2” Male NPT Injector 
• “F” = 1/2” Female NPT Inlet and Outlet, with 1/2” Male NPT Injector 
• Maximum Viscosity: 1,000 Centipoise 
• Maximum Suction Lift: 15 ft water at sea level (14.7 atm psi) 

Electrical and Controls 

Electrical Power Requirement:  100 to 240VAC, 50/60Hz 

Motor: Brushed DC, 100:1 Turndown, Continuous Duty (100% motor speed = 166 rpm/spm) 

Power cord options available (6 feet length): 

• 115VAC 50/60HZ, NEMA 5/15 plug  (U.S.) 
• 220VAC 50/60HZ ,CEE 7/V11 plug (EU) 
• 230VAC 50/60HZ, NEMA 6/15 (U.S.) 
• 240VAC 50/60HZ, AS 3112 plug (Australia / New Zealand)  
• 230VAC 50/60HZ, BS 1363/A plug (UK)  

Inputs: 

• 4-20 mA – fully configurable (V model) 
• Frequency / Pulse input – fully configurable (V model) 
• Stop/Start Dry Contact Closure (or Wet Contact) (Normally Open) 
• FVS (Flow Verification System) (Flow sensor provided by others) 

Outputs: 

• Motor Active output (Open collector)  
• Alarm Output – Triggers with DFD or FVS  

Materials of Construction 

Non-wetted Components: 

• Enclosure: 413 Aluminum (Polyester powder coated) – NEMA 4X (IP 66) 
• Cover Screws: 300 Series stainless steel 
• Pump Head Cover: 316 Stainless Steel 
• Motor Shaft: Chrome-plated steel 
• DFD System Sensor pins: Hastelloy C-276 
• Power Cord: 3 conductor, SJTW-A water-resistant 
• Mounting Brackets and Hardware: 316 Stainless steel 

Wetted Components: 

• Pump Head: PVDF 
• Adapter Connections: PVDF 
• Valve Cartridges: PVDF 
• Valve Balls: Ceramic 
• Elastomers: TFE/P 
• Static Seals: TFE/P (optional EP) 
• Diaphragm: DiaFlex® (optional Flex-A-Prene) 

Diaphragm Options 

DiaFlex® Diaphragm – This material consists of a natural PVDF flexible single-layer design compatible with most acids and bases.  DiaFlex® is not compatible with sodium hydroxide or ammonia.  

Flex-A-Prene® Diaphragm – An excellent material for most water treatment applications. Chemically resistant to 50% sodium hydroxide and many others. 

Dimensions and Weights 

Maximum Overall Dimensions: 13.1”W x 7.9”H x 11.5”D (33.2W x 20.1H x 29.2D cm) 

Product Weight: 24 lb (10.9 Kg) 

Product Shipping Weight: 31 Lb. (14 Kg) (approximate) 

Agency Listings 

CE  

cETLus 

RoHS Compliant 

NEMA 4X