Introduction to the MD3 Pump

Description 

The MD3S Chem-Feed Multi-Diaphragm Pump is a positive displacement chemical metering pump that delivers smooth, continuous chemical feed even when injecting chemicals that off-gas like Peracetic Acid and Sodium Hypochlorite.   

The cutting-edge Hyperdrive Technology allows for alternating pumping action between two diaphragms: when one diaphragm is in the suction phase, the other is in the discharge, resulting in a smooth chemical feed profile and minimizing the risk of vapor lock.  

The MD3S uses either DiaFlex^® or Flex-A-Prene^® diaphragms.  DiaFlex^® diaphragms are designed to last the life of the pump. 

Product Overview / Features of the MD3S Peristaltic Pump 

• The MD3S pump can deliver up to 52.6 GPH (199 LPH) at 100% motor speed.  
• Up to 145 psi. (See pump curve for exact pressure requirements at specific flow rates) 
• Brushless DC Motor capable of 2,000:1 turndown.   
• NSF 61 Listed. 
• 5” Display and Touchscreen Interface. 
• Manual Speed Control. 
• Remote Start/Stop. 
• Secondary Start/Stop for Auto-Prime, Pressure Switch (or other on/off contact closure) 
• 4-20mA input and 4-20mA output. Fully scalable at the pump.  
• Pulse and Frequency input speed control. 
• Four Alarm Outputs. (programmable)  
• Advanced Communication Protocols: Ethernet IP, Modbus TCP/IP, Profibus.  
• Integral DFD (Diaphragm Failure Detection) leak detection.  
• FVS (Flow Verification System) input.  
• Manual Prime and Auto Prime. 
• Wetted parts are PVDF connectors/manifold and pump head, DiaFlex® or Flex-A-Prene® diaphragms, Alfas or EP O-rings/Seats, and ceramic ball checks (optional Teflon ball checks.)  
• Simple IP67 M12 connectors for communication wiring. 
• 5 Year Limited Warranty. 

Applications 

The MD3S pump is designed to provide smooth chemical feed for a variety of chemicals and processes.  It can reliably pump chemicals that off-gas such as sodium hypochlorite, peroxide, ammonia, and PAA (peracetic acid), as well as a variety of other chemicals.  

The smooth flow profile and full diaphragm stroke allow the MD3S to effectively pass gasses without vapor-locking, minimizing the need for re-priming.   

The MD3S pump is constructed of chemical-resistant materials, making it an excellent choice for aggressive acids and mixed or proprietary chemicals. 

Product Matrix  

Use this matrix to reference your product number.   

FAQs

Frequently Asked Questions