Municipal
MD3
System
About the MD3S Pump
The MD3S Pump is designed to be simple and easy to operate. The pump comes with pre-installed and tested firmware. If firmware has not been updated recently, firmware for this pump may need to be updated. Check Blue-Central for latest firmware.
Firmware Updates
A Firmware Update may be required periodically to ensure the MD3S has the latest updates. To check for firmware updates, visit the Blue-White website product page and check firmware documentation. Firmware instructional video is located on the website.
Firmware updates required a USB-A to USB-C cable to connect a laptop/PC to the pump. Do not use a USB-C to USB-C cable. If laptop/PC only has USB-C port, a USB-A to USB-C adapter must be used.
System Information
All MD3S pump system information can be accessed by pressing the App key, and then pressing the System Information key.
Information available in System Information:
- Pump Name
- Chemical Name
- Firmware Version
- System Build
- Manufactured Date & Time
- Serial Number
- Model
- I/O Firmware Version
- Motor Firmware Version
- Industrial Protocol firmware Version
- Lifetime Run Hours
