Operation

Display and Readouts                                              

The F-2000 has an 8-digit LCD Display which displays flow rate or totalization.  

When measuring continuous flow (i.e. 24 hours per day, 7 days per week), do not operate the meter in the upper 25% of the calibrated flow range. The paddle speed in these high flow ranges is fast. Damage to the paddle may occur if the meter is allowed to run continuously at the high flow rate, especially with corrosive or abrasive fluids. 

Simply press the “Enter” button on any of the models to toggle between flow rate and totalization.  

Model RT:   The F-2000 RT model is the basic rate flowmeter. The meter will display the rate of flow from .01 through 99999999 in any engineering units. The meter will display the totalized flow from 1 through 99999999 in any engineering units. 

Model PC:  The F-2000 PC model is the process control flowmeter. The meter will display the total flow amounts from .01 through 99999999 in any engineering units.  The meter will display the totalized flow from 1 through 99999999 in any engineering units.  The F-2000 PC can send trigger alarms and output relay based on flow programmed flow profiles for high flow, low flow, and totalized flow. 

Model AO:  The F-2000 AO model is the analog output flowmeter. The meter will display the flow rate amounts and the total flow amounts from .01 through 999999 in any engineering units. The meter will display the totalized flow from 1 through 99999999 in any engineering units.  The F-2000 AO can provide an analog output signal in either 4-20ma or 0-10VDC. The output signal is scalable and easy to program. 

Model AP:  The F-2000 AP model combines all the features of the PC and the AO models.