Accessories and Spare Parts

Accessories                                              

Strainer – To improve priming and minimize debris entering the pump, it is recommended that a strainer be used with the system.  Strainer options are available for purchase separately.  

Injector – An injector is needed for injecting into piping and vessels. It can also be used to prevent siphoning when pumping downhill.   Injector options are available for purchase separately. 

Tubing (Suction and Discharge) – Clear PVC suction tubing and PE discharge tubing can be purchased separately.  

Wall Mount Bracket (Shelf) – Blue-White offers a sturdy polyethylene Wall Mount Bracket for easy mounting on a shelf.    

Tanks – Blue-White has a variety of tank systems and cylindrical tanks available. 

Additional piping accessories – Blue-White can provide additional items for your system, including pressure gauges, pressure switches, pressure relief valves, calibration columns, back-pressure valves, pulsation dampeners, and strainers.   

Complete Skids  – Blue-White manufactures complete skids systems for ease in installation and set-up.  Visit our skid page for options.  

Spare Parts   

The M1 Pump complete spare parts list is located in the Instruction Manual.  Recommended spare parts are list below: 

ITEM NO.	PART NUMBER	DESCRIPTION	QTY
1	90011-014	Spacer, Back	1
2	71000-350	Roller Assembly (Rotor) for use with A1-1T, A1-2T, A1-3T, and A1-7T tubes	1
2	71000-159	Roller Assembly (Rotor) for use with A1-4T, and A1-6T tubes	1
2	71000-255	Roller Assembly (Rotor) for use with A1-8T tubes	1
3	A1-1*	Tube Assembly, ¼” OD, Flex-A-Thane®	1
3	A1-3*	Tube Assembly, 7/16” OD, Flex-A-Thane®	1
3	A1-4*	Tube Assembly, ¼” OD, Flex-A-Prene®	1
3	A1-6*	Tube Assembly, 3/8 OD, Flex-A-Prene®	1
3	A1-7*	Tube Assembly, 7/16” OD, Flex-A-Prene®	1
3	A1-8*	Tube Assembly, 7/16” OD, Flex-A-Chem®	1
4	A1-SXX-C	Pump Head Cover, Acrylic	1
5	90011-160	Thumb Screw with 9/64” key drive (maximum torque 6-8 in-lbs)	3
6	C-330-6	Tube Nut, Compression, for 3/8” Tubing	2
7	90002-684	Touchpad Cover, Polycarbonate
* specify fitting   T = ¼” x 3/8” tubing connection, M = ½” MNPT, MB = ½” Male BSPT  (example, A1-1M)